Get in touch

Cashflow planning software update: Monte Carlo now in the UK FE CashCalc gross cashflow modeller

FE CashCalc users in the UK and Ireland can now run Monte Carlo stress tests in the gross cashflow modeller. You can run one simulation across all pots or any combination, with no rekeying into the Monte Carlo tool. 

What clients really want to know about their retirement plan is will it hold up and how much will they have? A single projection based on assumed average returns shows one outcome. It does not show the range of outcomes a client could face, or the risk that they cannot live the retirement they want. 

Advisers and clients now expect to run stress tests on cashflow plans to see that range of outcomes while also seeing their tax liabilities, to give a complete picture. 

Until now, FE CashCalc could not do both together. To run Monte Carlo on a gross plan, you had to rekey it into the net modeller. That meant extra manual work before the stress test could start and a plan held in two places.  

Our clients asked us to resolve this, so this has changed. Monte Carlo is now available in the stress testing section of the UK and Irish versions of the gross modeller, part of our market leading cashflow planning software – FE CashCalc.

While an initial release covered the UK gross cashflow modeller on 27/10/2026, This functionality was extended to the Irish gross modeller a weel later on 03/11/2026.

What is Monte Carlo modelling? 

Monte Carlo modelling is a stress test that runs a plan many times, each time with a different sequence of market returns. A standard cashflow projection assumes a fixed rate of return each year, so it shows a single outcome. Real markets do not behave that way. Returns vary from year to year, and the order in which good and bad years arrive can change how long a client's money lasts. 

In FE CashCalc, Monte Carlo runs 10,000 simulations. The results show the range of outcomes, from pessimistic to optimistic, so you can see how the plan performs across that range. 

FT Adviser has more information here.

What is a gross cashflow modeller? 

A cashflow modeller is a tool that projects a client's income, spending and assets over their lifetime, so you can see whether their money supports the life they want. 

FE CashCalc has two cashflow modellers, gross and net. The gross cashflow modeller is the one where you enter figures before tax and FE CashCalc calculates all of the tax due. That gives you the tax position in detail, and more detail for more complicated cases. 

In the net cashflow modeller, you enter the client's figures after tax, so you have to work out the tax yourself separately. 

 

Net cashflow modeller 

Gross cashflow modeller 

Figures you enter 

After tax 

Before tax 

Who works out the tax 

You, before you enter the figures 

FE CashCalc, which calculates all of the tax due 

Monte Carlo 

Yes 

Yes, in the UK (Ireland by end of 2026) 

Monte Carlo was previously available in the net modeller in FE CashCalc only. 

What is new in the UK and Irish FE CashCalc gross cashflow modeller? 

Monte Carlo was already available in the FE CashCalc net cashflow modeller. It is now in the gross cashflow modeller too. It works in the same way as in net, so if you have used it before, it will feel familiar but with some enhancements. 

The release adds the following to gross cashflow planning: 

  • No rekeying: run Monte Carlo straight from your gross plan, with no rekeying between the gross cashflow modeller and the Monte Carlo tool 
  • Combined pots: run one simulation across all pots or any combination, using the contributions, withdrawals and charges already in your plan 
  • 10,000 simulations: set the asset allocation, age and minimum threshold, then run 
  • Yearly breakdown: see the 25th (pessimistic), 50th (average) and 75th (optimistic) percentiles 
  • Save and re-run: change the pots included and run it again 
  • Printable report: pots, parameters, charges and money in and out, exported as a PDF and ready for the client file 

You also keep the simple, intuitive interface of FE CashCalc, but this is powered up with the detail you need for more complicated cases. 

How do you run Monte Carlo in the gross cashflow modeller? 

In practice, this looks like the following. 

  1.  Open the stress testing section of any gross plan. 
  2. Select one pot, or multiple pots. If multiple, you then select what combination or all of them. 
  3. Set the parameters. These are the asset allocation that informs the growth template, the age to run the simulation for and a minimum threshold. 
  4. Run the 10,000 simulations. 
  5. Review the graph of scenarios and the yearly breakdown. 
  6. Save the simulation, change the pots included and run it again, or print the report. 

How do combined pots work? 

When you combine pots, FE CashCalc takes the contributions, withdrawals and charges from the underlying gross cashflow and applies them to the combined pot. You do not need to enter them again. 

Percentage charges are blended. FE CashCalc works out the percentage charge for each pot, adds them together and divides the total by the combined value to give one percentage. 

You can then change which pots are included and run the simulation again. This lets you compare scenarios on the same client plan, such as running pensions alone and then adding other assets. 

An example in practice 

Consider a client with two pensions and an ISA. You include all three pots in the gross plan, set the asset allocation and run the Monte Carlo simulation. 

The yearly breakdown shows how the combined pots behave at the 25th, 50th and 75th percentiles. You can then replace the ISA with a different investment and run the simulation again, to see how what your recommendation looks like vs the existing portfolio. 

You save both runs, print the report for the one you want to discuss and add it to the client file. At no point do you rekey the plan into another modeller. 

Obviously, the pots, parameters and results will depend on each client's plan. 

What do the Monte Carlo results show? 

The results show how the combined pots behave over the client's retirement as withdrawals draw them down. 

A graph plots a random 200 of the scenarios FE CashCalc has run, so you can see the spread of outcomes at a glance. This enables a productive and informed conversation with your client. 

A yearly breakdown shows the outcome at three levels to simplify things for discussion: 

  • 25th percentile: the pessimistic outcome 
  • 50th percentile: the average outcome 
  • 75th percentile: the optimistic outcome 

The breakdown also shows money in and money out, including contributions and withdrawals, along with the charges applied. The minimum threshold lets you test whether the plan reaches the figure the client needs. 

The printed (or PDF) report lists the pots included, the parameters you set, the charges, and the money in and out. It is ready to add to the client file. 

What does this mean for advisers and paraplanners? 

Each part of the release removes a step or adds clarity to the conversation. 

One plan, end to end. You stay in the gross cashflow modeller. Rekeying a plan into the net modeller is no longer part of the process, which gives you a manual step back. 

A fuller picture. One simulation can cover all of a client's pots, alongside the tax that the gross modeller calculates for you. 

Clearer client conversations. A stress test shows the range of possible outcomes, not a single line. It’s simplified for them to understand with pessimistic, average and optimistic scenarios highlights. You can use it to give clients more clarity and comfort about their plan. 

Evidence for the file. The report records what you ran and how, so paraplanners can add it to the client file without preparing separate notes. 

Room to explore. Saved simulations and re-runs let you test different pot combinations without starting again. 

How does this fit with FE CashCalc development? 

FE CashCalc is one client-facing system, covering onboarding, fact find, client portal and reporting. Each release aims to make that workflow more complete. 

This release responds to requests from FE CashCalc users. Two of the most common were Monte Carlo in the gross modeller and the ability to model multiple pots at once. Both are now in place. 

Try Monte Carlo in your gross plans

Monte Carlo in the gross cashflow modeller gives you a stress test across any combination of pots, with no rekeying, a yearly breakdown at three percentiles and a printable report. It is included in your existing FE CashCalc subscription, so you can use it on your next client plan.

Page updated with launch in the Irish gross cash flow modeller on the 3rd of November 2026.

FAQs

Frequently asked questions

Monte Carlo tests a cashflow plan against a range of possible market outcomes, rather than a single average projection. In FE CashCalc, it runs 10,000 simulations and shows the results at the 25th, 50th and 75th percentiles. 

Yes, in the UK and Irish gross cashflow modellers. Monte Carlo is now in the stress testing section. You no longer need to rekey the plan into the net modeller. 

Yes. You can run Monte Carlo on any saved gross cashflow model from the past. Open the stress testing section of the plan, choose the pots to include, set your parameters and run the simulation. 

No. It is included in your existing FE CashCalc subscription. 

In the net cashflow modeller, you enter figures after tax and work out the tax yourself first. In the gross cashflow modeller, you enter figures before tax and FE CashCalc calculates all of the tax due. In the UK and Irish gross modellers, Monte Carlo is now available in both.